Xenserver missing USB drive after reboot

SCREWLOOSE IT technical document

After plugging in USB drives on a Xenserver sometimes the drive goes missing. 1.) modprobe -r usb_storage 2.) modprobe usb_storage and its back. URL: https://discussions.citrix.com/topic/278640-usb-drive-no-longer-seen-as-removable-storage-after-reboot/      

iPECS eMG80 Password Reset

SCREWLOOSE IT technical document

iPECS eMG80 web admin password reset To reset the user, admin or maintenance level password to the default values. This procedure has been available since software A.0Fc. To complete this you must connect directly to the Serial port on the eMG80. This is for security reasons that this procedure needs to be performed on-site. The […]

ERROR Non Genuine Consumable

SCREWLOOSE IT technical document

If you replace toner cartridges, image drums or other consumables with any non-genuine ones, “Unknown Consumable detected” appears and the device stops working. To continue printing by using non-genuine consumables When “Unknown Consumable detected” appears on the touch panel and the device stops working, you can follow the procedure below to switch to an operable […]

Yealink Click To Dial from Chrome

SCREWLOOSE IT technical document

I have been playing around with this for a while and i have managed to get this going. This is really just notes for me but it may have you too. Install Chrome C2D URL Then under options fill out the IP address and username and password (admin and admin by default) Dial http://$phoneUsername:$phonePassword@$phoneAddres/servlet?number=$number&outgoing_uri=%account% Hangup:  http://$phoneUsername:$phonePassword@$phoneAddres/servlet?key=X I’m […]

Xerox Service Mode

Press and hold the 0 key for 10 seconds then simultaneously press START. You will then be asked to enter a code. Type “6789” and Enter. That will put you into UI Diagnostics. This will work for both machines and all Xerox machines that use the Connect Key Software. Most will take you directly into […]